20A 12V-36V 500W DC Brushless Motor Controller Treiber Brett Modul keine Halle

1、DC12V-36V high power motor controller allow you to adjust various voltage for widely using.

2、The product is easy to driver motors, with over current protection and short circuit protection.

3、VR speed control port connection method can be controlled by voltage regulation control or PWM control speed voltage regulation can be adjusted by the adjustable resistance.

4、Speed control function: voltage Speed regulation or single chip microcomputer control PWM Speed regulation

5、The motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.

Specifications:

Drive plate type: JYQD_V6.3E1

Voltage range: 12V-36V

Peak current: 20A

Drive power: ≤ 500W (related working voltage)

Size: 63x43x17mm

Speed control function: voltage Speed regulation or single chip microcomputer control PWM Speed regulation

Control terminal connection:

1, GND

2, VR Speed control port connection method can be controlled by voltage regulation

control or PWM control Speed voltage regulation can be adjusted by the adjustable

resistance (20K 3 pin bit VR port side of the port side of the 5V port to connect to the

GND port through the regulation of voltage control)

3, ZF positive reverse port connection method to connect 5V a direction to the direction of GND

4, Singnal Speed pulse output port output of a circle of pulse = motor pole number x 3

5, 5V control terminal 5V voltage output port

Power end connection:

1, VCC power positive input port (12V-36V)

2, GND power input port

3, MC brushless DC motor without a sense / no Holzer motor three line W

4, MB brushless DC motor without a sense / no Holzer motor three line V

5, MA brushless DC motor without a sense / no Holzer motor three line U

Package include:

1 x Brushless DC motor drive plate