Masonry paint not only protects your property but can bring it back to life. Available in various colours So not only improves the appearance of your property but protects it from weathering. Available in 20 litre tubs Colours:Black, Brick Red, Brown, Buttermilk, Cornish Cream, Dark Grey, Grey, Magnolia, Sandstone, Terracotta, White Application: Brush or roller. Spreading use: Up to 10sqm per litre on smooth surfaces Drying time: Allow at least 2-4 hours drying time Recommend use: Exterior Finish use: Smooth coats recommend Masonry Paint surface preparation Allow all new surfaces to dry out completely. Wash down previously painted surfaces with a detergent solution to remove dirt, grease chalking paint etc. Treat any areas affected by mould, lichens, algae and moss with a suitable fungicidal wash. Make good minor defects with a suitable exterior filler. Use a sand and cement mix for larger holes and cracks allow to dry prior to painting. New or sound bare surfaced should be sealed with a thin first coat of masonry paint (add up to one part clean water to five parts paint). Just for our customers we do recommend for you to do a small test patch area first prior to painting to make sure you are happy with the colour. NOTE: Seal new, weathered or bare surfaced with stabilising primer. Do not use in extreme of temperature (below 7˚c) or during rain, fog or relative humidity above 80%. More colours available upon request. When ordering masonry paint, please order enough as batches may vary when re-ordering. The colours shown are rough guide so they may vary in shade. If you’re going to order a second tin, the paint is produced in batches, so please include the batch number which is on the top on the lid so the next tin you receive should be out of the same batch. Please test the paint on the surface first. We try to send the paint out the same day, but that’s not always possible. |