220V 0–180 PSI air compressor pressure switch control valve regulator with quick-connect fitting

General Description

The air compressor pressure switch control valve regulator is an essential instrument for pressure control. It operates on 220V and is designed for a pressure range of 0 to 180 PSI. This device is equipped with a quick connector for easy and fast installation.

Technical Specifications

• Color: as shown
• Materials: plastic, electroplated aluminum, iron
• Voltage: 220 V
• Operating Pressure Range: 0-0.8 MPa
• Maximum Flow Rate: 3000 L/min
• Gauges: 0-180 PSI
• Pressure Switch Control Range: 95-125 PSI
• Adjustable Discharge Regulator: 30-120 PSI
• Inlet and Outlet Port Thread: G1/4 (0.4"/11 mm)

Installation

This regulator is easy to install. It can be mounted inverted, vertically, or horizontally according to preference. the user.

Usage

The regulator allows for automatic pressure control:

• When the pressure is below 90 PSI, the compressor starts.
• When the pressure exceeds 120 PSI, the compressor stops.
• It is also equipped with a red ON/OFF button for convenient operation.

Other Information

• The piston seal uses a V-shaped seal for improved sealing and wear resistance.
• The piston design offers 30% higher flow than traditional diaphragm models.
• The valve is suitable for use in direct-line, oil-free silencers and small belt conveyors.
• Aesthetically pleasing and modern appearance.