220V 50W Adjustable Temperature Pyrography Machine Tool Kit for Woodworking and Leatherworking (Single Plug)

【Wood Burning Kit Type】 AC 220V 50W wood burning machine; 20 pieces of 1mm diameter high-temperature electrical wire, 2 pieces of high-strength, high-impedance alloy pens. A screwdriver can be used to install and remove the pen tip. (★ Note: The CD does not include English instructions; it only provides an introduction to wood burning patterns.)
Adjustable Temperature: The heating strip can be used at a normal temperature of 0-800℃. The copper wood burning tips can be used at a temperature of 0-500℃ for fine results.
Temperature Control Warning: When adjusting the pen temperature, please keep the normal temperature range within the gray zone. Do not exceed the red zone, as excessive temperature will reduce the pen's lifespan, even if it burns other components. Proper temperature setting is very important; normally the pen is slightly red.
【Advantage of this Pyrography Kit】 This wood burning kit is a professional pyrography machine. It has two heating pens that can be used simultaneously. It features a high-strength, high-temperature alloy tip that is not flexible, offering a long lifespan and resistance to oxidation and carbon deposits.
Instructions for Use: Turn on the switch when using the machine. The machine will start when the indicator light is red. Adjust the pen temperature using the thermostat. Slowly adjust the voltage until the tip of the heating wire turns gray. Do not exceed 500 degrees Celsius when using the thermostat. Do not allow the writing temperature to exceed 500 degrees Celsius, as this can easily burn the writing tip. The pen will be slightly red in the gray zone (do not allow it to turn red).