220V COB LED Strip, 3M Flexible DIY LED Strip Light, IP65 Waterproof, 3000K LED Strip, 3M, Warm White

Specifications: Strip Type: COB LED Strip (chip on board) Material: Silicone Color Temperature: Warm White 3000K Strip Length: 3 meters; Width: 10 millimeters; Thickness: 6 millimeters Power Cable: 1.5 meters Number of LEDs: 320 LEDs/meter Voltage: 220V-240V Power: 13 watts/meter Brightness: 600 - 700 lm/meter Color Rendering Index: >80 Dimmable: No Ambient Temperature: -20°C to +60°C Switch Position: Approximately 60 cm from the connection Package Contents: 1 x LED Strip; 1 x Nano Double-Sided Adhesive Tape; 1 x User Manual Warranty: 2 years Important Note: Due to heat generation, do not use the LED strip coiled for extended periods! 1. The self-adhesive LED strip can be applied to a clean, dry, and smooth surface. Once installed, it is unaffected by humidity or heat. 2. The LED strip is marked for cutting every 50 centimeters; you can cut it as needed. Insulate the cut edges with electrical tape. 3. If the LED strip remains slightly lit when the switch is off, follow these steps: unplug the connector, rotate it 180 degrees, and plug it back in to turn off all the LEDs. 1. COB Design: Unlike traditional SMD LED strips where each individual LED is visible every few millimeters, this strip appears as one long, continuous light source. The COB (Chip On Board) design allows for a denser arrangement of LED chips (320 LEDs/m), ensuring brighter and more uniform lighting. Color Rendering Index (CRI) > 80. 2. Easy Installation: The LED strip plugs directly into a standard 220V electrical outlet (no transformer required), ready to use. The strip's power cable is equipped with a built-in fuse and circuit protection, ensuring increased safety. (Packaging includes strong double-sided nano adhesive for mounting on a clean, dry, and flat surface.) 3. Cuttable: The LED strip is marked to be cut every 50 centimeters, as needed. Be sure to disconnect the power cable before cutting the LED strip. 4. IP65 Waterproof (LED section): The LED strip is protected inside a transparent tube, providing protection against rain and moisture. (Note: Only the LED section meets the IP65 waterproof standard. For outdoor use, the strip ends and connections must be protected with waterproof tape!) 5. Wide application: This COB LED strip is ideal for living rooms, kitchens, workshops, bathrooms, attics, makeup mirrors, glass display cases, staircases, gardens, pergolas, etc.