220V Digital Electricity Meter 1 Phase 2 Wire 4P Din Rail Electronic KWh Meter (20(80)A)

Features:

1. Installation on standard 35mm DIN rail, conforms to DIN EN50022
2. Six pole width (module 12.5 mm), conforming to JB/T7121-1993.
3. Can select 5 + 1LCD digit display (99999.1kWh).
4. Standard configuration short terminal cover, can select extension terminal cover, to protect for safe use.
5. Unidirectional measurement of single-phase, two-wire active energy consumption. This is not the case with the direction of flow of the charging current. Complies with IEC 62053-21.

Specifications:

Features:
Installation on standard 35 mm DIN rail, conforms to DIN EN50022.
Six pole width (12.5mm module), conforming to JB/T7121-1993.
Can select the display of digits 5 + 1LCD (99999.1kWh).
Standard configuration one passive pulse output port (polarity), can select increase a remote passive pulse output port (non-polarity), conforms to IEC 62053-31
Standard configuration does not detect the direction of load current flow. Can select automatic detection of charging current flow direction. And instructions via an individual LED.
Unidirectional measurement of single-phase, two-wire active energy consumption. This is not the case with the direction of flow of the charging current. Complies with IEC 62053-21.
Standard configuration short terminal covers, can select extension terminal cover, to protect for safe use.
Specifications:
Model: option)
Insulation performance: AC voltage 4kV for 1 minute, waveform pulse voltage 1.2/50us 6kV
Size: 10 x 7.6cm / 3.94 x 2.99in
Weight: Approx. 270-277g
Package Included:
1 x DIN Rail Electric Meter
1 x Manual
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you do not mind before ordering.

-Contact our customer service in case you need assistance additional