220V DN10 3/8" Normally Closed Solenoid Valve, Zinc Alloy Electromagnetic Electric Valve for Diesel, Gas, Air, Oil, Water

【Normally Closed Solenoid Valve】 The solenoid valve is an actuator for industrial process automation control systems. The device can be automatically activated or deactivated upon receiving an electronic control signal to perform on/off control or regulate the flow of fluid in the pipeline. For use with pipelines carrying water, air, oil, and low-viscosity, non-corrosive fluids.

【Installation Method】The direction of water flow is indicated on the valve body. If installed in the opposite direction, the solenoid valve will not function correctly. There are two wires to connect, one to the live wire (phase) and the other to the neutral wire (neutral). Connecting one wire to the live wire and the other to the neutral wire is not required (note: this is a 220-volt system).

The solenoid valve can be used for cold water and hot water up to 80 degrees Celsius. [Horizontal Installation] This solenoid valve is designed for horizontal indoor installation in a dry environment. If used outdoors, the coil must be well protected from water. Solenoid valves can be widely used in textiles, printing, chemicals, plastics, rubber, pharmaceuticals, food, building materials, machinery, household appliances, surface treatment, etc.

【To shut off water supply in case of flooding】Especially in the event of flooding, a normally closed solenoid valve is necessary because in case of power failure or interruption, the solenoid valve closes and isolates the circuit, whereas a normally open solenoid valve requires current to close.

【Water type solenoid valve】It is suitable for working with water or other liquids. It can automatically or remotely control the flow of the working fluid, such as water, oil, and other liquids. Because the valve is sealed with rubber, cleaning of the working fluid is significantly reduced, the opening and closing speed is high, and reliability is high. Zinc alloy body + copper coil.

Specification:

Body Material: Zinc alloy body + copper coil

Sealing Material: NBR nitrile rubber

Suitable for: Water, gas, oil

Control Type: Normally closed (on, off)

Thread Diameter: 2W-10 3-point (3/8", DN10)

Flow Size: 4mm

Temperature: -5℃ ~ 80℃

Operating Pressure: 1 MPa

Package Includes: 1 x Solenoid Valve