220V single-phase 2-wire 4P electronic electricity meter on DIN rail (5(30)A)

Features:1.Installation on standard 35 mm DIN rail, compliant with DIN EN50022
2.Six poles wide (12.5 mm module), compliant with JB/T7121-1993.
3.Can select 5+1 LCD digit display (99999.1 kWh).
4.Standard short terminal cover configuration; extension terminal cover can be selected for added protection and safety.
5.Unidirectional measurement of single-phase, two-wire active power consumption.Irrelevant to the direction of load current flow. Compliant with IEC 62053-21.
Specifications:Features:
Installation on standard 35 mm DIN rail, compliant with DIN EN50022.
Six-pole width (12.5 mm module), compliant with JB/T7121-1993.
Can select a 5+1 digit LCD display (99999.1 kWh).
Standard configuration: one passive pulse output port (polarity). An additional passive pulse output port (non-polarity) can be selected. Compliant with IEC 62053-31.
The standard configuration does not detect the direction of the load current flow.Automatic detection of the load current flow direction is available.Instructions are provided by individual LEDs.
Unidirectional measurement of active power consumption in single-phase, two-wire systems.Irrelevant to the direction of the load current flow.Compliant with IEC 62053-21.
Standard configuration short terminal cover; extension terminal cover can be selected for added protection and safe operation.
Specifications:
Model: XTM75S-U
Accuracy: Class 1
Voltage: 220 V < Current: 5 (30) A, 15 (60) A, 20 (80) A (optional).Insulation Performance: AC voltage 4 kV for 1 minute, pulse voltage waveform 1.2/50 US 6 kV.Size: 10.x 7.6 cm / 3.94 x 2.99 inches
Weight: Approx.270-277g
Package Included:
1 x DIN rail electric meter
1 x manual
Note:
Please note that the new and old types of this product will be sent randomly, and make sure you don't mind this before ordering.