230V NC electric heating actuator manifold for underfloor heating systems

Electrothermal actuators are used for diverter valves, small valves, and dynamic balancing valves in water distribution networks. They constitute the electrical part of the valve control mechanism.

Features: 1. LED indicator: illuminates when powered on and turns off when powered off, thus facilitating adjustment.

2. Paraffin wax impeller, powered by a PTC heater.

3. Spring return function: the valve closes after a power interruption (normally closed).

4. Stroke position indicator.

5. Integrated initial half-open function for simplified installation.

6. Nut fastening for simple, quick, and easy removal.

Material: ABS + PC alloy

Cable length: 80 mm

Stroke: approx. 3.5 mm

Voltage: 230 V AC

Power consumption: 2 W

Protection rating: IP54

Ambient temperature: -5 °C to 60 °C

Suitable for underfloor heating thermostats.

Flame-retardant PC housing, internal components: flame-retardant PA66.

Mounting position: vertical, 85° downwards.

Contents: 1 x Electric thermostatic actuator

Note: Due to manual measurement, slight color variations may occur.

Due to differences in monitor displays, the actual color of the item may vary from the photo.