24V 100W Self-Priming High Pressure Diaphragm Electric Water Pump with Pressure Switch

Features: 1. The water pump with a pressure switch will automatically shut off when the water outlet pressure is sufficiently high. 2. High reliability, fast water output, high pressure, high stability. 3. Self-priming, quiet operation, low energy consumption. 4. Made of durable material, corrosion-resistant, wear-resistant, and long-lasting. 5. Used in industrial equipment, chemical equipment, ships, beverage filling, household cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, artificial misting, pipeline pressurization, and air conditioning cleaning. Specifications: Features: 1. The water pump with a pressure switch will automatically shut off when the water outlet pressure is sufficiently high. 2. High reliability, fast water output, high pressure, high stability. 3. Self-priming, quiet operation, low energy consumption. 4. Made of durable material, corrosion-resistant, wear-resistant, and long-lasting. 5. Used in industrial equipment, chemical equipment, ships, beverage filling, household cleaning, water purification and treatment equipment, vehicle cleaning, agricultural spraying, artificial misting, pipeline pressurization, air conditioning cleaning, cooling, coal metallurgy, garden spraying, etc. Specification: Condition: 100% Brand New Item Type: Water Pump Model: YA24-100 Voltage: 24V Maximum Power: 100W Maximum Pressure: 11KG Working Pressure: 7KG Opening Flow Rate: 8L/M Vertical Suction: 1.5M Lift: 70M Package List: 1 x Water Pump Note: 1. Please allow slight error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same way, so the color of the item shown in the photos may be slightly different from the actual object. Please consider the real item as the standard. Operating Instructions: 1. Connect the pump to the inlet and outlet pipes. Ensure that the connection between the inlet and outlet pipes and the pump is airtight; otherwise, it will result in low pressure or water leakage. Tip: There are arrows on the pump cover to indicate the direction of water inlet and outlet, and the direction of the arrow is the direction of water outlet. 2. Install the filter at the inlet end. The filter density must be greater than 80 mesh (i.e., 80 holes per square centimeter). 3. Connect the microdiaphragm pump to the motor. The electrical parameters of the connected power supply must meet the motor's input requirements. 4. Turn on the power, and the motor pump will begin to operate. 5. Allow the water to flow for 5 to 10 seconds, purging the air from the pump and pipeline. Once the water level is stable, temporarily turn off the power and connect the water gun or pump head. 6. Turn the power back on to operate.