24V 10A 240W DIN rail power supply, DIN rail power supply transformer, AC100-240V 2.8A input, DC24V 10A output, NDR-240-24 industrial switching power supply

【Easy to Install】: NDR-240-24 Guide type 24V DC power supply for easy installation, designed with a rear mounting hole. 【High Heat Dissipation】: The 24V copper transformer has good conductivity and is not easy to overheat. Good heat dissipation through ventilation, rapid heat dissipation by air, long service life, and safe operation. 【Stable Performance】: The DIN rail switching power supply converts incoming AC current to a stable DC voltage and supplies it to devices and systems. Voltage regulators are smaller and more stable than traditional transformers, so you can use them with confidence. 【Multiple Protection】: 24V DC DIN Rail power supply with overcurrent protection, overvoltage protection, overload protection, short circuit protection, and other multiple protection functions. 【Widely Applied】: 24V 10A DIN Rail power supply widely used in industrial automation control systems, distribution boxes, instruments, communication equipment, etc. Specifications: Item Type: DIN Rail Power Supply Material: Aluminum + Plastic Product Model: NDR-240-24 Input Voltage Range: 100-240VAC 2.8A Frequency Range: 50/60 Hz Output DC Voltage: 24 VDC Rated Current: 10 A Current Range: 0-10 A Rated Power: 240 W Ripple and Noise: 150 MVP-P Voltage Adjustment Range: 24-28 VDC Voltage Accuracy: ±1.0% Linear Tuning: ±0.5% Load Tuning Rate: ±1.0% Power Factor: PF > 0.98/115 VAC, PF > 0.95/230 VAC (at full load) Efficiency (Typical): 88.2% Leakage Current: <1.5 mA/240 VCA Output Method: 2 output groups Protection Mode: Overload, overvoltage, and short-circuit protection Operating Temperature: -10 to 50 degrees Celsius Product Dimensions: 12*11*4 cm Product Weight: Approximately 470 g Package Contents: 1*DIN rail power supply