24V Automatic Centrifugal Water Pump for Small Pressure Boosters for Domestic Heating, EU Plug

Features:1. AUTOMATIC CONTROL: The automatic induction switch is controlled by the water flow.Before turning on the pump, please open the tap to ensure there is water flow.
2. RANGE OF USE: This pump can be used with tank and tankless water heaters, with a maximum flow rate of 5.5 GPM and a maximum delivery head of 15 meters.
3. SAFE OPERATION: When the water inlet to the pump is close to zero water pressure, the pump stops operating, providing automatic, safe, and reliable protection.
4. GOOD PROTECTION: The centrifugal pump is IP65 waterproof, the temperature resistance range is 0 to 65 ℃, it can be used in various environments, and has high practicality.
5.WIDE APPLICATION: Suitable for a variety of domestic water applications such as gas, water heaters, water line boosting, etc., with a wide range of applications.
Specifications:Item Type: 24V Water Pump
Product Model: MT24-18E
Working Current: 2.8A
Insulation Class: Class H
Dryness: Low Noise
Flow Rate: 25L/min
Discharge Head: Approx.15 meters / 49.2ft
Waterproof Rating: IP65
Inner Pipe Diameter: Approx. 15 mm / 0.6 inches
Temperature resistance: 0-65 ℃

How to use:Install and use directly.
Package list: 1 x pump 1 x power adapter 1 x water hose 1 x user manual 1 x double-sided adhesive tape 2 x screws 2 x expansion screws
Note: 1. The water pump has a built-in water flow control valve.A minimum flow rate of 1.5 L/min is required to open the valve and start the pump.If the water flow control valve cannot be opened, the power must be disconnected again for 3-5 seconds, and the water pump will be forced to start for 10 seconds.Powering and running for 10 seconds will automatically stop the pump, indicating that the water flow control valve is not open.Testing method: Take a mineral water bottle and connect it.Generally, a mineral water bottle has a capacity of 500 ml, which can hold approximately 3 bottles of water per minute and can be installed and used.