Skip to main content
1/5

250 m × 0,65 m self-adhesive protective fleece, 140 g/m² – Painter’s and stair fleece for renovation, wallpapering and refurbishment

(£1.40/m)

Buying for your business?

Negotiated prices excl. VAT up to -20%

Create a pro account
Sold by Aquagart

Product information

Description

AQUAGART Self-Adhesive Protective Fleece 140 g/m² – 0.65 × 25 m

Absorbent decorating and stair protection fleece made from 100% polyester with a self-adhesive, waterproof LDPE film – 16.25 m² of coverage for renovations, painting, wallpapering and house moves.

Self-Adhesive Floor Protection for Renovation Work

AQUAGART self-adhesive protective fleece protects suitable floors, stairs and walkways during painting, wallpapering, renovation, refurbishment and house moves. The adhesive film side provides a secure grip on suitable smooth surfaces and reduces slipping or shifting of the protective fleece.

The roll is 0.65 m wide and 25 m long, providing a total coverage area of 16.25 m². The white fleece is made from 100% polyester, has a weight of approximately 140 g/m² and is approximately 1 mm thick.

Absorbent Fleece Surface with Moisture Protection

The absorbent polyester (PES) fleece surface takes up moisture, paint, paint splashes and typical work-related dirt. The transparent, self-adhesive LDPE film on the underside is waterproof and, provided the material is intact, prevents moisture or paint from reaching the floor underneath.

Benefits of AQUAGART Protective Fleece

  • 16.25 m² of coverage: Each roll is 0.65 m wide and 25 m long.
  • Absorbent surface: The PES fleece absorbs moisture and paint.
  • Waterproof underside: The LDPE film protects the underlying surface against moisture penetration.
  • Self-adhesive film side: Reduces slipping or shifting on suitable surfaces.
  • Easy to adapt: The protective fleece is easy to unroll and cut to size.
  • Versatile use: Suitable for painting, wallpapering, renovation, refurbishment and house moves.
  • For floors and stairs: Can be used as floor protection, stair protection and a covering for walkways.
  • Reusable under certain conditions: Can be used again if the material is clean, undamaged and retains sufficient adhesion.

Applications

  • Painting and varnishing
  • Wallpapering
  • Renovation and refurbishment
  • Remodelling and construction work
  • House moves and furniture transport
  • Covering suitable floors and stairs
  • Protecting walkways and work routes

Installation Instructions

  1. Allow the underlying surface to dry completely and clean it thoroughly.
  2. Remove all dust, dirt and release agents.
  3. Lay the fleece with the self-adhesive film side facing down.
  4. Unroll the protective fleece as smoothly and evenly as possible, avoiding creases.
  5. Allow an overlap of approximately 10 cm when laying multiple strips.
  6. If necessary, secure the edges with suitable adhesive tape.
  7. Immediately remove any creases or potential trip hazards.

Important Information About the Underlying Surface

The underlying surface must be completely dry, clean, free from dust and release agents, and have sufficient tensile and compressive strength. The protective fleece is not suitable for newly laid floor coverings, porous stone surfaces or clay tiles. A vapour-permeable protective covering should be used on these surfaces.

On waxed or varnished wood and parquet surfaces, as well as older or heavily worn surfaces, carry out a test in an inconspicuous area before applying the fleece over a large area. Due to differences in materials and environmental conditions, completely residue-free removal cannot be guaranteed on every surface.

Reuse and Removal

The protective fleece can be reused if it is clean, undamaged and still sufficiently self-adhesive. Before each reuse, check both the fleece and film sides for dirt, residues, holes, tears, reduced adhesion or separation of the film.

When removing the fleece, do not pull it vertically away from the underlying surface at a 90° angle. The ambient temperature should be between +15 °C and +45 °C during removal. Do not remove the protective fleece in freezing conditions.

Technical Data

Product typeSelf-adhesive protective fleece
Fleece material100% polyester (PES)
Weight per unit areaApprox. 140 g/m² (± 10%)
Film materialPolyethylene (LDPE)
Film thicknessApprox. 30 µm (± 10%)
Total thicknessApprox. 1 mm
Fleece colourWhite
Film colourTransparent
Roll width0.65 m
Roll length25 m
Coverage area16.25 m²
Fleece/film composite propertyWaterproof

Storage and Disposal

The roll can be stored for approximately six months under normal indoor conditions at temperatures between +10 °C and +30 °C. During storage, protect it from direct sunlight, excessive heat, dust and moisture.

After use, the protective fleece can be disposed of with ordinary household or residual waste.

Features

  • Brand
    AQUAGART
  • ManoMano Reference
    ME292442106
  • MMID
    889885396175
  • Product code
    1052174750
  • EAN
    4251682526449
You are here:
The DIY, home and garden specialist

The DIY, home and garden specialist

Reliable delivery

Reliable delivery

Flexible payment options

Flexible payment options

More than 7 million individual and professional customers

More than 7 million individual and professional customers