2m Black Shower Door and Enclosure Fixing, Shower Barrier and Retention System, Silicone, Anti-Overflow Shower Threshold, Self-Adhesive Rubber Water Dam, Waterproof Door Seal for Floor

• Installation Notes: 1. The area around the walk-in shower barrier must be sealed with additional sealant (packaging not included). 2. For better adhesion, you can heat the back of the adhesive with a hairdryer. 3. At the corner, we recommend cutting it to the correct size at a 45-degree angle, then joining the two parts to ensure they are secure.
• Height 12mm/0.47in: The height of the bathroom shower barrier is only 12mm. Compared to a folding shower tray seal, which cannot block the flow of water with a height > 12mm, the small height will not obstruct movement and can prevent water from spreading over a large area.

• Wide application: 1. Can be used as a kitchen countertop sealant around the edge of the countertop (kitchen sink, washbasin, window sill, bathtub rim). 2. Can be used on the floor (bathroom floor, shower tray, around the toilet or washing machine, balcony floor). 3. Can serve as a threshold (bedroom door, bathroom door). 4. Can be used to block gaps from 0 to 20 mm (between the countertop (bathtub, floor) and the wall.)
• High-quality silicone material? The waterproof shower strip is made of food-grade organic silicone, resistant to corrosion, high temperatures, wear, and odorless. It is flexible and can be cut to size, and its smooth surface makes it very easy to clean.
• Quality service? If you are not satisfied after receiving the shower door seal, please feel free to contact us. We will provide you with the best solution within 24 hours.

Countertop water retention strip
Our countertop water retention strips can be used on the kitchen sink edge, stove edge, bathroom sink edge, and windowsill edge to prevent your clothes and floor from getting wet, and to keep your kitchen and bathroom clean. Organized

Shower Floor
The shower barrier can be used on the bathroom floor, the edge of the shower tray, as a threshold, and effectively separate the dry and wet areas.

Fill the Gap
The silicone water barrier can be used to fill gaps, such as between the sink and the wall, or between the bathtub and the wall, to prevent water from seeping into crevices, where mold and hard-to-clean areas can develop.

Corner Decoration
Our shower threshold is designed for right angles, fitting well against the countertop (floor) and wall. It can decorate corners and crevices and provide a waterproofing effect.

Warm Tips for Installation

• Buy one size of 5 cm to 10 cm longer than the required length
• Clean and dry the floor before installation.
• If the floor is uneven, fill it with silicone sealant before installation.
• Use plastic sealant silicone to cover the ends and edges of the shower water barrier.
• Once installed, it must be kept dry for 24 hours and then left for 1 to 24 hours. 2 days in autumn and winter.
• Do not bend loosely. It can only be installed in a straight line.
• In the corner, cut a 45-degree angle, then finish both sides as desired. 90-degree angle.