2P 40A 300mA Type A Residual Current Circuit Breaker with Automatic Reclose, AC230V, RCCB Automatic Closing, Intelligent Circuit Breaker with LED Display, GYAR9-AC-G

【Intelligent Automatic Reclosing】: The Type A circuit breaker has various electrical signal options: sinusoidal AC, pulsed DC, and pulsed half-wave + DC, allowing for wider application and stable performance. It automatically closes the circuit breaker when the RCCB trips accidentally without manual resetting, reducing manual maintenance costs, correcting faults promptly, and improving efficiency. 【Automatic/Manual Switching】: In AUTO mode, the 40A circuit breaker can automatically reset after a fault. In MANU mode, manual reset is required after a fault. After the "LOCK" button is opened, the closing operation cannot be performed to protect electrical safety and prevent accidental contact. 【Self-Locking Mode】: Automatic recloser after a circuit failure. The circuit closes automatically after 9 seconds for the first failure, 59 seconds for the second, and 299 seconds for the third. After the fourth failure, the recloser is in self-locking mode, and it is necessary to check the circuit's safety before manually reopening the gate. 【Digital LED Display】: Automatic closing circuit breaker in AUTO mode: flashing red indicates gate opening, flashing green indicates gate closing; in MANU mode: the yellow indicator light is always on for manual opening and closing of the gate. The code breaks to indicate the number of openings and closings, as well as the countdown timer for reclosing. 【Wide Application】: The automatic reclosing smart gate can be widely used in grid-connected photovoltaic AC distribution boxes, as well as in unattended mobile phone base stations, elevators, smart homes, smart factories, new energy vehicle charging stations, etc. Control Signal: Automatic reclosing + dry contact control Digital Display: 3-digit break code display: number of closing and reclosing times, closing and reclosing countdown time Effective Control Signal Duration: >400ms Closing Action Time: <1s Separating Action Time: <0.5s Control Circuit Cable Length: ≤1500m Power consumption: ≤ 1.5VA (static), ≤25VA (dynamic) Rated insulation voltage: 400V Rated impulse withstand voltage Uimp (between S2C-RM DC and MCB): 4kV (4.9kV at sea level) Self-locking protection: within 10s 3CO / 20s 4CO / 30s 6CO, the product will be protected by self-locking; after 40s, automatic recovery. Automatic reset after 40s Electrical life: 10,000 cycles, 3 cycles/min Indicators: Green normal status, red overcurrent fault MCB Automatic/manual switching: Auto remote opening and closing is available, MANU remote opening and closing is disabled Material: PC Operating voltage: 230V AC Rated current: 40A Operating frequency: 50/60Hz 300mA Leakage protection rating: Mechanical life: 10,000 Protection class: IP20 Ambient temperature: -25...+70°C Storage temperature: -40...+70°C 28-12AWG 2.5mm² Wiring capacity for power and control signal terminals 28-14AWG 1.5mm² Wiring capacity for auxiliary signal terminals Rail mounting: DIN rail EN 60715 (35 mm) Package includes: 1* Smart reclosing circuit breaker, 1* Instruction manual (English)