2P Dual Power Automatic Transfer Switch, Fast Switching PC, AC 230V, for Home and Factory

Features:1. Good Materials: The high-quality flame-retardant PC plastic material offers good insulation, high-temperature resistance, anti-aging properties, and is safe and reliable. The silver contacts greatly improve conductivity and lifespan.
2. Two Operating Modes: Can operate automatically or manually, with millisecond switching without power interruption. It features a compact structure, reliable transmission, convenient installation and maintenance, and a long service life.
3. Easy Installation: The dual-power automatic switch is a miniature household power switch primarily used to test whether the main or backup power supply is functioning correctly.This product is specifically designed for DIN rail mounting and is intended for use with PZ30 power distribution boxes.
4. Fast switching: When the normal power supply malfunctions, the backup power supply operates immediately, and the millisecond-level switching ensures continuous power, reliability, and safety.
5.Wide application: Switches to the backup power supply during a power outage and back to the main power supply when power is restored.Suitable for backup power systems with 230V AC at 50 or 60 Hz.Widely used in various situations where continuous power outages are unacceptable.
Specifications:Item Type: Dual Power Automatic Transfer Switch
Material: PC, Silver.
Indoor Insulation Voltage: AC 690V
Outdoor Rated Voltage: AC 400V
Rated Working Voltage: 230V AC
Grade: PC Grade
Specification: 2p
Electrical Life: 2,000 cycles
Mechanical Life: 5,000 cycles
Short Circuit Current: 50kA
Fuse: RT16-00-63A Voltage Withstand: 8kV
Control Circuit: US Rated Control Voltage: AC220V 85%-110% US.
Auxiliary Circuit: 2 relays, each relay has two sets of contacts.Capacity: AC 220V 50Hz, LE = 5Y.
Contact time: Operation switching time: Return time: Closing time:

How to use:Use according to the instructions.
Package list: 1 x Dual power automatic transfer switch 1 x User manual
Note: 1. The maximum ambient temperature must not exceed 40°C, the minimum temperature must not fall below -5°C, and the average temperature over 24 hours must not exceed 35°C.2.The altitude of the installation site must not exceed 2000 m.3.When the maximum temperature reaches 40°C, the relative humidity at the installation site must not exceed 50%.When the temperature is at its lowest (-5°C), the relative humidity is higher; for example, when the temperature is 25°C, the relative humidity is 90%.Due to temperature fluctuations, special measures must be taken to address occasional condensation on the product surface.