2P Dual Power Automatic Transfer Switch Generator Transfer Switch AC110V 50Hz 60Hz 63A

Features:1.Two operating methods: The automatic transfer switch can be operated automatically or manually to ensure continuity of power supply. It features a compact structure and reliable transmission.
2.Continuous power supply: The automatic transfer switch operates so that when the normal power supply malfunctions, the backup power supply activates immediately to ensure continuity of power.When the normal power supply is switched on, it automatically switches back to normal power from the backup power supply.
3.Standard 35mm DIN rail mounting: This automatic transfer switch is suitable for 50 or 60 Hz AC 110 V 63 A backup power systems. It is designed for domestic DIN rail mounting and is intended for use with PZ30 distribution boxes.
4.Flame-retardant PC material and silver contacts: The dual-power automatic transfer switch is made of flame-retardant PC material, well-insulated and resistant to high temperatures, and features silver contacts that are anti-aging and easy to install and maintain.
5.Check the integrity of the ATS before installation. Turn the ATS on or off using the control handle, verify the flexibility of the drive, and test the generation and disconnection conditions for each load stage under normal and backup power. 2. Use the wiring according to the diagram.
Package List:1 x Dual Power Automatic Transfer Switch
Note:1. The maximum ambient temperature should not exceed 40°C, the minimum temperature should not be less than -5°C, and the average temperature over 24 hours should not exceed 35°C. 2. The altitude of the installation site should not exceed 2000 m. 3. When the maximum temperature reaches 40°C, the relative humidity of the installation site should not exceed 50%; when the temperature is less than -5°C, the relative humidity should be higher, for example, the temperature is 25°C and the relative humidity is 90%. Due to temperature changes, special measures must be taken to address occasional condensation on the product surface.