2P photovoltaic surge protection device, high precision, stable performance, DC600V surge arrester

Features:1.Function Description: This surge protection device can protect the AC power system from lightning or power surges.
2.Excellent Electrical Conductivity: The surge protection device uses a precision chip as an internal component, ensuring accuracy and strong conductivity.
3.Flame Retardant: Enhances safety during use; flame retardant and able to withstand higher working forces, improving performance and providing a better user experience.
4.Easy Installation: This protector uses a 2P rail mount, making it very easy to install.Standard 36mm rail mounting and distribution box circuit breaker use.
5.Surge Protection: When the system experiences a surge due to lightning or other causes, the protector opens immediately within nanoseconds and grounds the surge, protecting the power supply to the devices.
Specifications:Item Type: Surge Protection Device
Model: CHLT 40PV
Material: PC (Flame Retardant)
Maximum Continuous Operating Voltage: DC600V
Rated Discharge Current: 20 kA (8/20 μs)
Maximum Discharge Current: 40 kA (8/20 μs)
Increased Voltage Protection Level: ≤2.8 kV
Number of Poles: 2P
Protection Rating: IP20
Operating Temperature: -40℃ - 80℃
Operating Humidity: ≤90% (at 25℃ on average)

Package List:1 x 2P Surge Protector
1 x Sliding Sheet

Note:1. The power supply must be disconnected before installation, and operation while the device is powered is strictly prohibited.During installation, please connect according to the installation diagram, where + is the positive line and - is the negative line. Do not make any mistakes. Once the installation is complete, close the circuit breaker (fuse) and check if the device is functioning normally.