2pcs 40mm PVC Ball Valve, U-PVC Plastic Water Pipe Valve Straight Connectors for Flow Control and Shutdown

Product Name: PVC Ball Valve.

Material: PVC

Color: Gray.

Applications: Irrigation systems, piping systems.

Dimensions: PVC ball valve with an inner diameter of 40 mm (= DN-32).

Quantity: 1 PVC ball valve. Made of thick PVC.

Connector Type: Glue

Type: Two-way ball valve

Features:

The port body is equipped with a red T-handle for easy water flow control.

All valves contain a ball integrated into the pipe to control the flow.

The ball is attached to a lever handle that rotates to fully open or close the valve.

Easy to use.

Widely used in water supply, waste disposal, irrigation, and industrial applications.

Widely used in irrigation and piping systems.

Connection Method:

This product is made of PVC. Use PVC glue for connection. This is not a hot-melt connection.

Installation Precautions:

In pipe fittings, glue the pipe for one minute and allow it to set for 15 minutes. There will be some resistance after 2 hours, and the water flow will be optimal after 24 hours.

Installation Tip: Clean the pipes and drinking water taps. Then, apply glue to the pipes and allow them to set for a few minutes. After 2 hours, it will have fully set.

We recommend watering again after 24 hours. Full port with red T-handle for easy water flow control. Widely used in irrigation and piping systems.