2PCS 48W 12V/24V RV USB Output, Dual PD3.0 Type-C (USB C) and Fast QC3.0 USB-A Car Power Outlet Wall Mount Port Panel for RV Boat Marine Truck ATV

The 12V USB socket is designed with a USB-C PD 3.0 port and a USB-A QC 3.0 port. USB-A output: 5V = 3A, 9V = 2A, 12V = 1.5A (18W Max). USB-C output: 5V = 3A, 9V = 3A, 12V = 2.5A (30W Max). Total power up to 48W. Input voltage: 12-24V. It can charge all your Android and iOS devices at maximum charging speed. Furthermore, it can be used... to cars, motorcycles, buses, RVs, boats, and so on. The USB-C port (PD 3.0 port) provides 30W of power for iPhone 17/16/15/14/13/12/11/Mini/Pro/Pro Max, iPhone X/XS/XR/8/8 Plus/SE, iPad Pro 12.9/Air 10.9/10.5/9.7/Mini 6/5/4/3/2, Galaxy Z Fold 6/5/4/3/Z Flip 6/5, Galaxy S10+/S9+/S8+, Galaxy Tab 12.4/11/10.5, and more. It charges from 0% to 80% at 4x speed in 30 minutes. (Note: For fast charging of the iPhone series, you must use a USB-C to Lightning cable.) The USB-A QC 3.0 port offers a maximum output of 18W, providing 4x faster charging speeds for compatible devices. Charge your device to 80% in just 35 minutes. It is also fully compatible with all versions of Quick Charge, offering the fastest possible charging for all non-fast charging devices. The 12V USB plug is not only made of scratch-resistant nylon but also equipped with automatic rebound plugs, effectively protecting the 12V USB-C plug from sudden water splashes and dust. The built-in smart IC chip protects your device from overvoltage, overheating, overload, or short circuit. (Note: If you don't need the caps, simply remove the springs and take off the covers.) No large holes are required; this is a surface-mount installation that can be installed on any flat surface without cutting a large hole—just a small hole for the wire. Connect the black wire to the negative terminal and the red wire to the positive terminal. In addition, the blue indicator light on the 12-volt panel-mount USB socket is always on when the power is applied, making it easy to locate in the dark. (Note: If you think the blue LED light is some kind of bright light, simply put a little black nail polish on the bulb or cover it with black tape to reduce its brightness.)