2Pcs Kobra 3 Hotend with 8 nozzle in brass of 0,4 mm, key of busse, 20 needles of cleaning and 4 sleeve of protection in silicone Compatible with Kobra 3/Kobra 3 Combo

【Kit of maintenance all-in-a】This kit of hotend is specially designed for the Kobra 3/3 Combo (Not compatible with MAX, V2, S1). It contains 2 set completely of hotend, 4 sleeve in silicone, 8 nozzle of replacement (0.4 mm), 20 needles, a key of 6 mm reducing thus the time stop.

【Please note】① In case of between the the printed, if the tube heating is not compatible with the Kobra 3, it can be sanded before installation to helps of paper of glass 800-1000. ② After installation of the new hotend, you unscrew check carefully that all the components are well tighten for prevent the leaks. Perform a of of the printed 3D for prevent the obstructions or the impression inexactes.

【Resistant to the heat, supports different filaments】Our tube heated in aluminum titanium + copper red offers a excellent conductivity thermal, supports industries to 300°C, is little susceptible of itself clogging and is completely compatible with of types of filaments excessifs as PLA, PETG, TPU, etc.

【Nozzle removable】Our nozzle is removable and replaceable, this which allows of reduce significantly the costs. The nozzle is in brass, this which allows a conductivity thermal more fast and more uniformly, all in avoiding the obstructions. Of more, it is wear-resistant and to the corrosion.

【How changes the nozzle】Start by heat the hotend for remove the residue of filament on the nozzle and the block heating. Now the hotend warm, unscrew the aging nozzle and retirez-la. Screw then the new nozzle firmly up to this that either well alignee with the bout of the tube heated for prevent the leaks. Do attention to the risks of of when of this operation.

【Installation plug-and-play】Kit preconfigure with a system of replacement without tool for a maintenance fast. For all helps additional, we contact before.