2PCS Static Window Film Self-Adhesive Window Film Privacy Window Film Anti-Glare Frosted Window Film for Kitchen, Office, Bathroom 45 x 200CM

Blocks 96% of UV rays for a healthy life. Note: In low winter temperatures, the window film will not be flexible enough; if installed directly, it will easily fall off, and the corners of the window film will easily lift. It is recommended to soak the film in warm water for a while before installation. Simply use water to easily adhere our window film to the window. When installing the window film, make sure you have removed the protective backing. The protective backing is very thin; please peel it off carefully. Provides good privacy and light transmission for a more comfortable lighting experience. Ensures privacy without blocking sunlight. This self-adhesive, opaque window film is for window decoration. You can only see shadows inside when there are objects or people moving near the windows. Installation Step 1: Clean and Measure - Clean your window thoroughly. Measure the width and length of your window. Step 2: Cut the film - Cut the film to the appropriate size, approximately 1 inch larger than the window. Step 3: Spray water on the glass - Wet the window completely. Step 4: Peel off - Carefully peel off the clear protective film behind the window film. Step 5: Position - Place the film against the window and use your finger to press down on the entire top edge of the film so that it adheres lightly. Step 6: Smoothing - Smooth the film using the squeegee, making sure there are no air bubbles inside. Dry your window completely with the cloth, slowly trimming any excess film at the edges of the window.