3-100W 220-240V LED Rotary Dimmer for Incandescent and Halogen Lamps, Adjustable LED Light Fixture, Black

Scope of application: LED dimmer according to UKCA and CE standards! For switching and controlling incandescent lamps, dimmable LED lamps, high voltage halogen lamps and halogen lamps with electronic transformers. It cannot be used for controlling transformers, fans, and inductive motors. Specifications: Rated Voltage/Frequency: 220-240 VAC/50 Hz. Adjustable Power: 3-100 W. Dimmable LEDs (PF = Power Factor): PF>0.9 3…100W, PF>0.5 3…50W. Dimensions (mm): 81*33.4*22*34.8. Single-wire connection: 0.75...2.5 mm². Black. Easy to Use: The LED controller allows you to adjust the brightness of the lamp by turning a knob and ensure the room is illuminated. Turn the control knob clockwise: the light intensifies until it reaches its maximum brightness. Turn the control knob counterclockwise: the light becomes dimmer. low.

Safety Protection: The LED dimmer has electronic overheat protection. It automatically switches off when the temperature reaches 80°C and automatically switches back on below 80°C.

Note: It should be specified that the required LEDs must be dimmable to avoid flickering problems with the dimmer. The LED lamp must be at least 3W. The LED lamp must be dimmable and compatible with rear-mounted dimmers.

When the dimmer is at the min/max brightness setting but does not correspond to the actual brightness, and fine-tuning with the screw is ineffective, the luminaire may have been manufactured with a limited dimming range.