3-blade wood stove fan – Wood stove fan – Pellet stove fan for wood stove/fireplace

Economical: No electricity or batteries required. This wood stove fan draws energy from the heat produced by your fireplace, wood stove, or pellet stove. Efficiently circulate warm air throughout your room. Better heat distribution: This 3-blade wood stove fan is designed to provide a very wide heat current. It helps circulate warm air horizontally throughout the room instead of rising vertically to the ceiling, making your room warm faster. Easy to use: No assembly required. Simply position the fan on a smooth, flat surface on your stove, near the side or back of the flue pipe. It will start working when the stove surface becomes hot enough.
Automatic Start: This wood stove fan will start working automatically when the surface temperature reaches approximately 50°C. The higher the temperature, the faster the fan spins. The general operating temperature range is 85°C to 350°C. Temperatures above 350°C can damage the fan and TEG units. Safer design: The fan comes with a bimetallic safety device at the base of the chimney fan. When the maximum operating temperature is approached, it will gently lift the front of the fan slightly to protect the fan and TEG units. The fan automatically recovers when the surface temperature decreases.