3-in-1 moisture sensor, soil water monitor, hydrometer, for agricultural plants, flowers, and gardens

Features: 1. It has a lightweight and portable design, convenient for both indoor and outdoor use. 2. Easy to use: This 3-in-1 moisture meter with light and pH testing functions does not require batteries, and you can use it indoors or outdoors. Insert the probe into the soil approximately 2 to 4 inches, then flip the switch to test what you want to measure. 3. Accurate reading: Moisture range: 1-10 (1-3 sec, 4-7 N/m, 8-10 N/m), relative light: 0-2000 lux (0-200 low, 200-500 low+, 500-1000 N/m, 1000-2000 high), pH range: 3.5-8 pH (acidic 3.5-6.5, alkaline 7-8). 4. Extremely convenient and easy to use! No batteries or preparation required; simply plug our soil tester into the soil area you wish to check and instantly get an accurate and precise reading. 5. Can measure soil moisture, pH level, and the sunlight intensity needed for plant photosynthesis. Specifications: Feature: It is lightweight and portable, convenient for indoor and outdoor use. Easy to use: This 3-in-1 moisture meter with light and pH testing function does not require batteries, and you can use it indoors or outdoors. Insert the probe into the soil approximately 2 to 4 inches, then flip the switch to test what you want to measure. Accurate readings: moisture range: 1-10 (1-3 sec, 4-7 normal, 8-10 humid), relative light: 0-2000 lux (0-200 low, 200-500 low+, 500-1000 normal, 1000-2000 high), pH range: 3.5-8 (acidic 3.5-6.5, alkaline 7-8). Extremely convenient and easy to use! No batteries or preparation required; simply plug our soil tester into the soil area you wish to check and instantly get an accurate and precise reading. Can measure soil moisture, pH level, and the intensity of sunlight needed for plant photosynthesis. Specification: Material: Plastic Size: 26 x 6 x 3.5 cm / 10.24 x 2.36 x 1.38 inches (approx.) Probe Length: 17.5 cm / 6.89 inches (approx.) Instructions: Step 1: Flip the switch to the moisture/pH/light position. Step 2: Push the probe into the soil approximately 2 to 4 inches. Step 3: Adjust the probe's position until the pointer on the dial wobbles slightly. Step 4: After 10 minutes, read the moisture/pH/light level on the dial. Step 5: Remove the probe from the soil and wipe it clean after each use. Package contents: 1 humidity sensor