1/5
3-inch Water Flow Sensor, Turbine Flow Meter, Induction Switch for Irrigation and Heating, NPN Output
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Qiudie-homelavafans
You may also like
Compare with similar items
Product information
Description
Features:1.OPERATIONAL PRINCIPLE: When water flows through, the magnetic rotor rotates and its speed changes. The sensor emits a corresponding pulse signal and sends it back to the controller to measure the water flow.
2.Sensor Specifications: The turbine water flow sensor has a 7.6 cm male threaded interface, an operating voltage range of DC5-18V, and an NPN pulse output signal.
3.EASY INSTALLATION: The water flow sensor is lightweight and compact, with a standard size and good sealing, making it easy to install and space-saving.
4.GOOD PERFORMANCE: The water flow meter sensor is stable in operation, resistant to high temperatures, and can start at low water pressure, offering high practicality.
5. Multiple Uses: Can be used in water heaters, credit card machines, water dispensers, flow measurement equipment, etc., with a wide range of applications.
Specifications:Item Type: Water Flow Sensor
Material: Aluminum
Surface Treatment: Electroplating
Output Signal: NPN Output Pulse Signal
Model: YF-DN80
Interface Size: 3in Male Thread
Voltage Range: DC5-18V
Inner Diameter: Approx.77 mm / 3in
Outer Diameter: Approx.87 mm / 3.4in
Wire Length: Approx.21 mm / 0.8 inches
Water pressure resistance: 1.75 MPa
High level output pause: > DC 4.5 V (DC 5V input voltage)
Output pulse duty cycle: 50% ± 10%
Load capacity: ≤ 10 mA (DC 5V)
Insulation resistance: > 100 mA
Flow range: 20 ~ 500 L/min, 1.7 MPa water pressure test for 1 minute without leakage or deformation
Flow pulse characteristics: F = (0.5 x q) ± 3%, F is the frequency, q is L/min
How to use:Wiring: The red wire is connected to the positive terminal, the yellow wire is the signal output line, and the black GND wire is connected to the negative terminal.
Package List:1 x Water Flow Sensor
Note: 1. Severe impact and chemical erosion are strictly prohibited. 2. Throwing or collision is strictly prohibited. 3. Install in the direction of the installation arrows on the product. 4. The average temperature should not exceed 120°C.
2.Sensor Specifications: The turbine water flow sensor has a 7.6 cm male threaded interface, an operating voltage range of DC5-18V, and an NPN pulse output signal.
3.EASY INSTALLATION: The water flow sensor is lightweight and compact, with a standard size and good sealing, making it easy to install and space-saving.
4.GOOD PERFORMANCE: The water flow meter sensor is stable in operation, resistant to high temperatures, and can start at low water pressure, offering high practicality.
5. Multiple Uses: Can be used in water heaters, credit card machines, water dispensers, flow measurement equipment, etc., with a wide range of applications.
Specifications:Item Type: Water Flow Sensor
Material: Aluminum
Surface Treatment: Electroplating
Output Signal: NPN Output Pulse Signal
Model: YF-DN80
Interface Size: 3in Male Thread
Voltage Range: DC5-18V
Inner Diameter: Approx.77 mm / 3in
Outer Diameter: Approx.87 mm / 3.4in
Wire Length: Approx.21 mm / 0.8 inches
Water pressure resistance: 1.75 MPa
High level output pause: > DC 4.5 V (DC 5V input voltage)
Output pulse duty cycle: 50% ± 10%
Load capacity: ≤ 10 mA (DC 5V)
Insulation resistance: > 100 mA
Flow range: 20 ~ 500 L/min, 1.7 MPa water pressure test for 1 minute without leakage or deformation
Flow pulse characteristics: F = (0.5 x q) ± 3%, F is the frequency, q is L/min
How to use:Wiring: The red wire is connected to the positive terminal, the yellow wire is the signal output line, and the black GND wire is connected to the negative terminal.
Package List:1 x Water Flow Sensor
Note: 1. Severe impact and chemical erosion are strictly prohibited. 2. Throwing or collision is strictly prohibited. 3. Install in the direction of the installation arrows on the product. 4. The average temperature should not exceed 120°C.
Features
- BrandOTHERS
- MaterialAluminium
- Pcs per pack1
- Measurement typeMechanical
- ManoMano ReferenceME242431654
- MMID377311635392
- Product codeQD-GB26Y62543
- EAN5008500125334
You are here:
'/%3E%3C/svg%3E){kind=small}