3-Piece 433.92MHz Universal Wireless Copy Remote Control Key Fob RF Transmitter for Garage Door Opener Clone 433MHz Duplicator

【Superb Design】Universal 433MHz RF wireless remote control. It's a duplicator that can clone other remote controls. A strong signal can penetrate walls, floors, doors, signs, etc. It can be controlled at a range of less than 50 meters in open areas. [Wide Encoding Range] 2260, 2262 (such as PT2262, SC2262, HS2262, LX2262, HX2262, etc.), 1527 (EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527), PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680 HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46N00F49E, different PIC chip manufacturers have different chip model prefixes, everything will be fine as long as the chip model numbers are the same. 【Easy to Use】 Three conditions must be confirmed before purchase. ①The original remote control must be working normally. ②The frequency must be 433.92MHz. ③The chip code (encoder chip) must be as shown. Not all remote controls can be copied. This copy remote control can only copy a portion of the remote control. 【More Flexibility】 There are 4 buttons on the remote control, meaning you can clone 4 buttons. Each button functions independently. The clone remote can be reset and configured without limitation. 【Wide Application】 The product can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can use the copy remote to clone multiple remotes. such as garage doors, electric doors, shutter doors, expansion doors and electric curtains, fans, lamps, lighting, ventilation devices, signal transmission, and so on. The package includes: 3x cloned remote controls, product manual. Parameter: - RF Frequency: 433MHz - Battery: 1x 27A 12V (included) - Buttons: 4 buttons - Transmitter Range: Open space is over 50 meters. Please confirm three conditions before purchasing: 1: The original remote control is working normally. 2: The frequency: 433.92MHz. 3: The chip code (encoder chip) is as shown below: 2260, 2262, 1527, PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026. SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003 Reset: Press and hold "A" and "B" keys together --- The LED will flash 3 times. Then release "B" key (while "A" remains pressed) and press "B" key 3 times --- The LED will flash and then turn off. Success. Programming: 1. Place the original remote control and the cloning remote control in a "back-to-back" position. Ensure they are in direct contact. Either the two remotes must be placed as close as possible (place both remotes side by side on the desk with no distance between them). 2. Press and hold a button on your original remote, then press and hold a button on your cloning remote. Continue holding until the LED flashes 2 times (Note: the LED flashes 2 times to prevent releasing the button). Then it will flash 3 times and remain steady, and you have successfully cloned the remote. If, for any reason, the clone does not flash more than 2 times, it means the signal is not passing through. Please slowly move the remote up and down until you find the point where the signal passes through.