3-Piece 433.92MHz Universal Wireless Copy Remote Control Key Fob RF Transmitter for Garage Door Opener Clone 433MHz Duplicator

【Superb Design】Universal 433MHz RF wireless remote control. It's a duplicator that can clone other remote controls. A strong signal can penetrate walls, floors, doors, signs, etc. It can be controlled from less than 50 meters away in open areas.

【Wide Encoding Range】2260, 2262 (such as PT2262, SC2262, HS2262, LX2262, HX2262, etc.), 1527 (EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527) PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46N00F49E, different PIC chip manufacturers have different chip model prefixes, everything will be fine as long as the chip model numbers are the same.

【Easy to Use】 Three conditions must be confirmed before purchase. ①The original remote control must be working normally. ②The frequency must be 433.92MHz. ③The chip code (encoder chip) must be as shown. Not all remote controls can be copied. This copy remote control can only copy a portion of the remote control.

【More Flexibility】 There are 4 buttons on the remote control, meaning you can clone 4 buttons. Each button functions independently. The clone remote can be reset and configured without limitation. 【Wide Application】 The product can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can use the copy remote to clone multiple remotes. such as garage doors, electric doors, shutter doors, expansion doors and electric curtains, fans, lamps, lighting, ventilation devices, signal transmission, and so on.

Package includes:

3x cloning remote controls

Product manual

Parameters:

- RF Frequency: 433MHz

- Battery: 1x 27A 12V (included)

- Buttons: 4 buttons

- Transmitter range: Open space is over 50 meters

Please confirm three conditions before purchasing.

1: The original remote control is working normally.

2: The frequency: 433.92MHz.

3: The chip code (encoder chip) is as shown below

2260,2262,1527, PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003

Reset:

Press and hold "A" and "B" keys together --- The LED will flash 3 times. Then release the "B" key (while the "A" key remains pressed) and click the "B" key 3 times --- The LED will flash and then turn off. Success.

Programming

1. Place the original remote and the cloning remote in a "back-to-back" position. Ensure they are in direct contact. The two remotes should be placed as close together as possible (place them side-by-side on the desk with no distance between them).

2. Press and hold a button on your original remote, then press and hold a button on your cloning remote.

Continue holding the button until the LED flashes 2 times (Note: LED flashes 2 times to prevent releasing the button). Then it will flash 3 times and remain steady, and you have successfully cloned the device. If, for any reason, the clone does not flash beyond 2 times, it means the signal is not being transmitted. Please slowly move the remote control up and down until you find the point where the signal is present.