3-piece set of 433 four-button metal electric garage door keys, universal remote control

Universal cloning remote control

433.92 MHz for gates, garages, etc.

You'll only need one remote control for your gate, parking lot, or garage door! Each button is independent and can program a different remote. Don't wait until yours breaks down; make a duplicate of your remote.

Choose this universal cloning remote control for your automatic garage doors, gate, windows, lights, etc.

Setting it up couldn't be simpler! Just place the two remotes next to each other and press both buttons simultaneously while they synchronize.

Once the blue button lights up, your remote control is ready to use!

See the complete list of compatible remote controls

The universal remote control can copy up to 4 different codes, allowing you to duplicate your old remote controls in seconds!

Compatible with 90% of remote controls operating at a frequency of 433.92 MHz.

Specifications

Power supply: 1 battery.

Signal range: 100m (without obstacles).

Signal frequency: 433.92 MHz.

Includes: Battery and user manual in French.

Complete list of compatible remote controls available.

WARNING:

Not compatible with rolling code remote controls.

Remote control Universal 433.92 MHz Code Copier for Gates, Garages, Alarms, Universal Remote Control Duplicator

Resetting

To reset, press and hold buttons 1 and 2 on the code copier remote simultaneously for approximately 10 seconds.

You will see the blue light flash rapidly for about 2 seconds, then flash more slowly; this indicates that the remote has been reset.

You can then release the buttons. When you press either button after this step, the blue light will no longer flash.

Copying the Code

Place the copy remote and the remote to be copied facing each other.

First, press and hold one button on the copy remote until the blue light appears once. Then, press and hold one button on the remote to be copied.

If the blue light shines continuously, the operation is successful.

Repeat the same operation to copy other buttons.

PS: If no light appears after 15 seconds, try again.