3-Piece Sheet Metal Bending Pliers 0° 45° 90° Jaw Width 60mm, Bending Tool for Sheet Metal Workers and Roofers (Red)

🔸【Precise Bending】The jaw gap is ≤ 0.1 mm, ensuring a uniform and clean bend line. The body is made of forged carbon steel with a blackened surface treatment, providing both strength and corrosion resistance.
🔸【Surface Protection】The clamping surfaces are smooth and flat, with no scratches on the metal. Carefully inspect the jaws and bending surface before first use; if you find any burrs, please sand them until smooth.
🔸【Comfortable Grip】The handles are covered with non-slip rubber and are optimally lengthened for effective leverage. When closed, an angle of approximately 20° remains between the handle and the body of the pliers – this prevents finger pinching.
🔸【Three Angles Available】Available in specialized 45°, 90°, and 180° versions, or in a combination set, to meet various bending requirements. The three different plier head angles also offer flexibility when working in confined spaces.
🔸【Usage Recommendations】Recommended for soft metals with a thickness of 0.5 to 1.2 mm. Not suitable for thicker sheet metal or high-strength steels. If the new pliers feel a little stiff at first, apply a few drops of penetrating oil to the joint and work them several times – the mobility will improve noticeably. Instructions: ① Mark the bend line: Clearly and precisely mark the bend line on the sheet metal using a scriber, following a straight edge. ② Align and clamp firmly: Always align the front edge of the jaws exactly with the mark line and clamp the metal edge firmly to prevent slippage or misalignment. ③ Bend evenly: Close the handles slowly and steadily so that the metal bends smoothly along the marked line. Avoid applying sudden pressure or attempting to achieve a large bend angle in one step. TIPS: 🤝 Please check the product dimensions before ordering, thank you. 🤝 Since the dimensions are measured manually, a slight variation of 1 to 2 mm is possible. Thank you for your understanding. 🤝 Due to differences in monitors, phone pixels, and lighting, slight color variations may occur. The actual color of the product prevails over the displayed color. Service: At [Company Name], your satisfaction is our priority. If you have any questions or suggestions, please do not hesitate to contact us. We are here to listen and will do everything we can to help you.