304 Stainless Steel High Pressure Shower Head Water Saving, Easy Installation, Waist-Shaped Spray Method

General DescriptionThe 0.3mm ultra-fine water outlet and the two annular spray plates form a waist-shaped water line, with a thin center and wide upper and lower sides. The design without propellers or turbines reduces resistance and gives you a more pleasant shower experience.The shower head is made from 304 stainless steel, making it resistant to rust and corrosion, while being more robust and durable than plastic models.Technical specificationsUltra-thin 0.3mm water outletIncreases water pressure and flow up to 200%Save up to 60% waterMaterial: 304 stainless steel21mm standard connector (G1/2)Compatibility and accessoriesCompatible with all standard shower hoses (hose not included)Removable filtration to reduce mineral build-up (limescale)InstallationRemove the hand shower installed on the existing shower hose.Check the condition of the washers on the hose and replace them if necessary.Attach the new one.Connect the hand shower to the shower hose.Turn on the water supply and check for tightness.If you notice any leaks, tighten the fitting and retest.UsageEach shower head has a built-in removable screen to filter sediment, making cleaning easier and preventing clogs. If a leak occurs, it is recommended to remove and reinstall the rubber seal.