30A IP65 Solar Disconnect Switch for Photovoltaic Panels – 2-Pole Waterproof DC/AC Enclosure

⚡ General Description This 30A solar circuit breaker is the reliable and safe solution for cutting off the power supply between your photovoltaic panels and your inverter. Designed for domestic installations, on roofs or outdoors (RVs, shelters, etc.), it guarantees perfect electrical isolation, even in rain or sun. IP65, UV and weather resistant — ideal for demanding French DIYers. 📊 Technical Specifications: Rated Voltage: AC 90–400 V / DC 12–400 V; Rated Current: 30 A; Breaking Capacity (Icu): 4 kA; Protection Rating: IP65 (waterproof and dustproof); Withstand Voltage (Uimp): 4 kV; Material: Reinforced ABS + thick copper; Contents: 1 circuit breaker, 4 PV connectors, 4 lugs, 4 screws + 4 wall plugs, 4 waterproof connectors; Integrated DIN rail (35 mm), pre-drilled holes on the back. 🔧 Installation: Ultra-fast installation: no complex wiring. Simply connect between the panels and the inverter — plug-and-play. The top/bottom waterproof connectors and the DIN rail simplify everything. Perfect for solo installation in under 10 minutes. ☀️ Use it as an emergency stop switch for maintenance, or as continuous protection against overvoltages and overloads. Ideal for grid-tied or off-grid photovoltaic systems. Maximum safety, total control — without compromise. 📦 Other information: Transparent housing for visual verification of operating status. Large ergonomic handle and integrated watertight silicone seal. Complies with European standards for residential solar installations. Certified for permanent outdoor use — zero maintenance, zero worries.