30A Solar Panel Charge Controller Regulator for 12V/24V Lead/Lithium Batteries - Intelligent Charge Controller with LCD Screen and Dual USB Ports, On/Off Timer Setting

This 30A charge controller is compatible with 12V and 24V systems. It features full 4-stage PWM charging (Boost, ABS, Equalization, Float). The power MOSFET acts as the electronic switch, eliminating the need for mechanical switches, and is equipped with an industrial-grade STM 8 microprocessor to extend your battery's lifespan. The backlit LCD screen displays PV/Battery/Charge charge and discharge parameters. Dual USB ports can provide your electronic devices with a maximum of 5V 2.5A. This solar controller is suitable for lithium-ion, lithium iron phosphate, and lead-acid batteries (open, AGM, and gel) with multiple charging timers (charging must be DC). It has a wide range of applications and automatically detects day/night conditions. To protect the lifespan of your battery, once the battery voltage drops below 8V, the solar controller automatically shuts off. PWM Charge Controller Protection: Dual MOSFET reverse current/overheating/undervoltage/short circuit/open circuit/overload/overcharge protection. Safer for home, industrial, commercial, etc. This controller is suitable for 3 types of batteries Battery Type Description: B1 is a lead-acid battery (12V/24V auto) B2 is a lithium-ion battery (3 strings of 11.1V lithium batteries). Factory default setting: B2 B3 is a lithium iron phosphate battery (4 strings of 12.8V) System Voltage: 12V/24V auto Current of Load: 30A Maximum Input Power and Voltage: 360W/24V (12V system); 720W/48V (24V system) USB Output: Dual USB output, 5V/2.5A Equalization: 12.6V (default) / Discharge Reconnect Voltage: 10.5V (default) / Discharge Cut-off Voltage: 9V (default) Light On/Off Voltage: 8V Solar Panel Self-consumption: <10mA Temperature: -35~60°C Size/Weight: 133.5mm*70mm*35mm PACKAGE LIST: 30A Solar Charge Controller Eight PWM Charge Controller Protections Dual MOSFET Reverse Current Protection Overheating Protection Undervoltage Discharge Protection Short Circuit Protection Open Circuit Protection Overload Protection Overvoltage Protection Overload Memory Protection Power Off Intelligent Solar Controller The product can automatically manage the operation of the solar panel and battery in the solar system. To protect the lifespan of your battery, once the battery voltage drops below 8V, the solar controller will automatically shut down (the LCD screen will also be unavailable). Solar Controller System Connection 1. Connect the battery to the charge controller (positive and negative terminals). 2. Connect the photovoltaic module to the charge controller (positive and negative terminals). 3. Connect the load to the charge controller (positive and negative terminals). NOTE: The reverse order applies when uninstalling! An incorrect sequence may damage the controller. Note: All data is measured manually; please allow for a 1-3 cm error. Due to differences in lighting and display settings, there may be some color variation. The actual product received shall prevail.