30ml Mould Inhibitor Spray Tile Remover Wall Cleaner Household Cleaner Corner Wall Mold Stains Detergent

1、The mold on the silica gel can be easily removed by using this product, and the gel texture can be used on the vertical plane or the inclined plane.

2、

Strong sterilization: the effective sterilization rate of wall tiles and wall sealants is up to 99%.

3、

Shelf life: use as soon as possible within 6 months after opening.

Capacity: 30ml/50ml

Shelf life: use as soon as possible within 6 months after opening

Use:

1. Dry the moldy place with a dry rag.

2. Spray on mold surface with spray.

3. Wait for 4-8 hours, do not use water to prevent heat from being wrapped by plastic film.

4. Wipe with water and cloth until no mold can be seen. If the stubborn mould is not clean at one time, it should wait for more than 12 hours, and it should be used at least twice. Until the mold is completely removed!

Matters needing attention:

1. Keep indoor ventilation before use, wipe the moldy black surface with a rag, the wet environment will affect the gel effect

2. Wear rubber gloves to prevent the gel from touching your hands during use.

3. If you are sensitive to a smell, you can wear a mask.

4. Spray on mold surface with spray.

5. The waiting time can be extended to more than 12 hours or even longer until the mold completely disappears.

6. In case of stubborn mould, do not take it out once, wipe it clean and repeat the operation.

7. After use, wipe the residual gel with paper towel and wash it with plenty of water.

8. Gel is not used to remove yellow stains. Yellow tile cleaner is recommended.

9. Some of the glass glue is moldy, and the release agent cannot penetrate the bottom of the glass glue. It is recommended to remove the glass glue with tools, and then use the release agent, a new glass glue.

10. Mold remover can only be used for PVC wallpaper, non-woven fabric and any fabric can only be used in white.

11. High temperature, freezing or direct light note to reduce the viscosity of the product. After use, it must be covered in a cool and dry place, preferably within 6 months after opening.

12. Do not touch non-ferrous clothing if it is invalid to use discolored or contaminated with metal parts.

13. Note that aluminum products are forbidden to use mold and gel!

1* Mould inhibito