32A Smart Double Pole Circuit Breaker – Remote Control by WiFi – 1P+N for Household Appliances – 35mm DIN Rail

General DescriptionThis intelligent DIN rail circuit breaker allows you to remotely control the operating status of electrical appliances. Thanks to its multiple functions, it is possible to define stop and start scenarios, while monitoring the energy consumption of household appliances in real time. Ideal for making your home smarter.Technical SpecificationsItem Type: DIN Rail Circuit BreakerMaterial: Copper, PA66Application: Smart Home ControlPanel Color: BlackRated Working Voltage: 230V ACControl Type: Remote Control, ManualNumber of Poles: 1P+N (Through-Through N Pole)Control Method: for SigMesh/for ZigBeeRail: DIN35Size: approx. 82x68x18mmCompatibility and accessoriesCompatible with intelligent control systems for Smart Lift. Can be used with other devices connected via ZigBee.Installation1.Connect the wire from the upper end of the circuit breaker to the lower end, verifying that the wiring is correct and that the WiFi signal is strong.2. Turn on your phone's Bluetooth and WiFi, open the app, then long press the power button for about 5-10 seconds until the LED light slowly flashes blue.3. Wait for the device to be recognized in the app and follow the instructions to connect it.Usage1. The LED indicator shows a solid blue light when the switch is activated.2. If the LED light is off, it means the switch is in off-grid mode. Pay attention to safety when operating manually.3. The LED indicator flashes blue slowly when in apage mode.