35lb Telescopic Magnet for Picking Up Screws and Parts, Retractable Handle 8.3 to 33 Inches, for Picking Up Nails and Screws

[Material] - The electric borehole water pump is made of ABS and alloy. It has high hardness and good sealing. Please wipe it with lubricating oil before each use and rinse it with clean water after use. When pumping abrasives and liquids containing solids, it is necessary to add a filter to the inlet pipe to extend its lifespan.

[High Performance] - The operating temperature range of the fuel pump is 5 to 49 degrees Celsius. The oil pump flow rate at 1500 rpm is 15 L per minute, and the oil pump flow rate at 3000 rpm is 30 L per minute.

Note: The recommended speed is between 1500 and 3500. Before use, ensure that the hose at the oil pump connector inlet is sealed and that the hose length does not exceed 2.75 meters (9 feet).

[How to Use] - Our product is powered by an electric drill. After starting, check if some fluid in the water inlet hose is drawn into the pump within 15 to 20 seconds. If not, you need to check if the oil inlet hose is correctly installed on the oil inlet pump. Note: Do not let the pump dry out! If the pump does not start, check if the hose is kinked or blocked. Do not run the pump in reverse!

[Portable] - The pump body is small, compact, lightweight, and easy to carry. You can easily transport it to the desired work site, then install it and begin using it, thus saving working time. It is best to install a sealing ring at the interface to prevent leaks during use. Check that it is correctly installed before use and that the air in the oil pump has been purged. [Widely Applicable] - The oil pump can also be used as a water pump. It is also suitable for swimming pools, aquariums, fountains, and can also be widely used for household cleaning.