35mm hinge jig, door cabinet hinge jig, concealed hinge jig, drilling guide locator for cupboards and wardrobes

【High-Quality Material】This concealed hinge jig is made of high-quality aluminum alloy, ensuring precise manufacturing, accurate positioning, a sharp drill bit, ease of use, wear resistance, durability, and a long service life. This very practical woodworking jig is an excellent tool set for furniture manufacturers and woodworkers to install concealed hinges on doors or cabinets.

【Double Clamp Design】We have improved the three-bearing drill sleeve of this hinge jig to reduce drill bit wobble and improve hole-opening accuracy. Double clamps on the front and back securely hold the jig without damaging the finish. Applicable to door thickness: 15-25mm, opening depth 10-15mm

【Margin Adjustment Function】 The total height of the upper, middle, and lower bearing drill sleeves of the hinge jig is 2cm. The higher the height, the lower the drill bit vibration and the more precise the drilling. We have added a margin adjustment block and 2 adjustment screws; the distance between the 35mm hole and the edge can be adjusted between 3 and 7mm, whereas in the previous version, the distance between the 35mm hole and the edge was fixed at 5mm.

【Installation Method】1. Install the margin adjustment block; 2. Install the 35mm hole opener, set the drilling depth to 12-13mm, and lock the limit ring. 3. Adjust the fixing size of the black pressure block of the quick-release fastener; 4. Move the drill guide locator to the marked and drilled position on the plate, and lock the quick-release fastener; 5. Drill the holes with the drill bit to a depth of 12-13mm, drilling 2 holes for 2mm screws.

【Cabinet Hinge Punch Set】1*hinge drill, 1*35mm hole opener, 1*upper link bearing, 1 depth locator ring, 2*wrenches, 1*2mm drill bit, 1*hex key. You can use the wrench to adjust the press plate to the desired thickness.

The hinge jig is made of high-quality aluminum alloy for strength, precise positioning, and a long service life. The hinge adjustment tool fits 35mm and 26mm hinges, allowing you to easily install multiple cabinet doors. The holes are precisely positioned, and it is easy to drill new holes without cracks or breakage.

Features

Made of aluminum for long service life, precise manufacturing, accurate locking, and easy operation.

The drill sleeve has been improved and replaced with a more wear-resistant bearing, which significantly reduces wear issues and is less likely to jam, making hole opening smoother.

Easy to install; no experts required.

Adjustable pressure plate: The thickness of the fixed plate can be adjusted from 15 to 25 mm.

Widely applicable to most common hinges: The distance between the 35 mm hole and the edge can be adjusted to 3-7 mm, suitable for most common hinges.

Specifications

Material: Aluminum Alloy

Product Size: 75*118mm

Quantity: 1 set

Package

1*Hinge Drill

1*35mm Hole Opener Tool

1*Top Bearing

1*Depth Positioning Ring

2*Wrenches

1*2mm Drill Bit

1*Hex Key

Tips

1. All product data is measured manually; there may be a 1-2cm error.

2.The first time you use it, it is recommended to try it several times; you will find the trick to using it. 3. During use or when idling, it is recommended to add a little lubricant inside the bearing to reduce loss of the hinge gauge and prevent rust.