35mm Hinge Template, Door Cabinet Hinge Template, Concealed Hinge Jig, Drilling Guide Locator for Cabinets and Wardrobes

【High-Quality Material】This concealed hinge jig is made of high-quality aluminum alloy, ensuring precise manufacturing, accurate positioning, a sharp drill bit, ease of use, wear resistance, durability, and a long service life.This very practical woodworking punch is an excellent tool set for furniture manufacturers and woodworkers to install concealed hinges on doors or cabinets.【Double Clamp Design】We have improved the three-bearing drill sleeve of this hinge jig to reduce drill bit wobble and improve hole-opening accuracy.Double clamps on the front and back securely hold the jig without damaging the finish.Applicable to door thickness: 15-25mm, opening depth 10-15mm【Margin Adjustment Function】 The total height of the upper, middle, and lower bearing drill sleeves of the hinge template is 2cm.The higher the height, the lower the drill bit vibration and the more precise the drilling will be.We have added the margin adjustment block and 2 adjustment screws. The distance between the 35mm hole and the edge can be adjusted between 3 and 7mm, whereas in the previous version, the distance between the 35mm hole and the edge was fixed at 5mm.【Installation Method】1.Install the margin adjustment block; 2. Install the 35 mm hole opener, set the drilling depth to 12-13 mm, and lock the limit ring.3. Adjust the fixing size of the black pressure block of the quick-release fastener; 4. Move the drill guide locator to the plate marking and drilling position, and lock the quick release; 5. Punch the holes with the drill bit to a depth of 12-13mm, drill 2 holes for 2mm screws.

【Cabinet Hinge Punch Set】1*hinge drill, 1*35mm hole opener, 1*top link bearing, 1*depth locator ring, 2*wrenches, 1*2mm drill bit, 1*wrench hexagonal. You can use the wrench to adjust the press plate to the desired thickness.

The hinge jig is made of high quality aluminum alloy for strength, precise positioning and long service life. The hinge adjustment tool fits 35mm hinges and 26mm hinges, allowing you to easily install multiple cabinet doors. All product data is measured by hand, there may be an error of 1-2cm.

2.The first time you use it, it is recommended to try it several times; you will get the hang of it.3.During use or when idling, it is recommended to add a little lubricant inside the bearing to reduce wear on the hinge and prevent rust.