35mm Hole Punch, Drilling Guide, Hinge Hole, Find a Jig Tool for DIY Woodworking

Material: The 35 mm diameter wire gabarit is made of aluminum material, durable to use, long-lasting.

Easy to use: the 35 mm wire gauge Charnière is a tool for DIY wood work, easy to use, adapted to your own operation at the house, not needing to be professional

Fable: the two of you will see each other on the base support, fix them on the table, the parts est plus solid et plus solid.

But: installation of the 35 mm door hinge opening, positioning of the door hinge opening, out of the wood door opening auxiliary

Size: 120x60x120mm / 4.72x2.36x4.72 pouces

Comment user

Install a 35 mm lens, adjust the depth of the lens, which is normally 12 à 13 mm, puis verrouillez la bague de limit;

Adjust the fixed size of the black pressure block of the rapid pince (remark: the tool can adjust the size of the fixed planche à 15-25 mm)

The pins should be moved towards the position of the mark and the pince positioning of the card, and the locking block is tightened quickly;

Fix the position of the ouvre-trou with the electric sensor, apply a constant screw to open the ouvre-trou at a depth of 12 * 13 mm, then perceive three views of 2 mm from the right two edges;

The distance between the top of 35 mm and the edge is 5 mm, convenient for the most part of the short pieces

Paquet

Positionneur 1 * 35mm

Ouvre-trou 1 * 35mm (avec anneau de limit)

2 * clé

Foret 1 * 2mm

1 * hexagonal inner clip

Briday