3D LED wall clock, modern digital alarm clock for home, kitchen, office, bedside table, wall clock, 24 or 12 hour display.

Modern Design: This alarm clock allows you to choose between a 12-hour and a 24-hour format. You can switch between 12-hour and 24-hour modes by pressing the + button for 3 seconds. Equipped with a large 23.4 x 9.1 cm 3D LED display, it is easy to read at night, and the time is clear at a glance. It is particularly suitable for children and the elderly. Adjustable Brightness and Night Light: With 3 brightness levels, you can freely adjust the digital wall clock according to your needs. The brightness of the LED digital alarm clock is reduced by 20% from 6 PM to 6 PM. If you need a night light, this electronic wall clock is your best choice. Two installation methods are possible: easy to install as a wall clock with a built-in hole or as a table clock with a fixed base. When traveling, it takes up very little space in a room or luggage. Our electronic clock is also practical for kitchens, hotels, tables, offices, desks, or bedside tables. Alarm clock with alarm and snooze function: the multifunctional digital clock has an alarm and snooze function. And you can freely set the reminder time. This digital alarm clock is an excellent Christmas gift for children or teenagers. Energy saving and environmental protection: Ultra-low power consumption LED, low cost, only 5V, although it can be connected to the USB port. The convenient USB port can be used anywhere. Reminder: The lithium battery (included) only functions as a power bank, can provide power, and can only operate via USB (included). Function: LED time display (0:00 time display). There are 3 brightness levels (standard brightness is medium). Night mode with automatic dimmer. There are 3 buttons: MODE, UP, DOWN. 4-position global time display (12/24-hour mode). Alarms are displayed in 6:00 format. Alarm clock with snooze function. Snooze function, 5-60 minutes (standard interval 5 minutes). Power supply: 5V (without power supply), CP2032 button cell battery (not included) for setting, USB cable (included), can only be charged via USB cable. If you use a battery without powering it, the clock will turn off. If you turn it on again, it will turn on and remember the time. If you have no battery, the clock will display 00:00 and will not save the time when you disconnect the power supply. Alarm Setting: Press and hold the 'ALARM MODE' button for 3 seconds to enter time setting mode and set the time in the following order: hour, minute, nap duration. 'AL' will light up during setting. When the alarm sounds: Press the 'MODE' button to activate the snooze function. The 'AL' symbol will flash. Or press the down button to deactivate the alarm. The 'AL' symbol will turn off. Night Mode: In night mode, the clock will automatically dim the LED. Press 'MODE' twice to switch to night mode. Press 'MODE' to activate or deactivate night mode. Specifications: Material: Acrylic. White. Digital display. Light color: blue/red/white/green. Battery: CR2032 (not included). Dimensions: 21.2 x 8.3 x 3.5 cm. Contents: 1 LED clock, 1 USB data cable, 1 instruction manual (French not guaranteed).