CHARNWOOD W692 Woodworking Dust & Chip Extractor, 2200w, 3hp Motor

The largest extractor aimed at workshops where extraction is not continuously needed.

Powerful & Quiet 3hp Induction Motor
2 Inlets For Simultaneous Extraction
Quick Action Metal Bag Straps
Transparent Heavy Duty Collection Bag
5 Micron Filter Bag
16amp, 240v Electric Supply Required
Drum Bag Clips to make easy work of changing the collection bag
Rubber Band on the Drum to give a better seal

These more powerful machines give a higher flowrate per hour which allows a longer hose length to be attached or a small system of branches and gates to be fitted around the workshop.
The largest in this range is for users who occasionally need a very high air volume. The two collection bags are filled together so that emptying is required less frequently. It can be used to collect from up to three machines simultaneously or attached to a system of branches & gates to be fitted around the workshop. Maximum recommended total hose length is 10 metres.

Supplied with 5 micron filter bags, transparent collection bags, durable steel fan, NVR switch, rubber wheels, quick release metal straps, 3 way inlet & 1.6m power cable (No plug).

A 16amp fixed electric supply is required to run this machine. We recommend using a 16amp plug.

Hose is not supplied as standard, our 100mm diameter transparent hose is recommended, sold by the metre. This machine is intended for Light Trade use which means it has a maximum continuous running time of 2 hours, after which the motor must be rested and left to cool.

Charnwood W692 Specification
Motor (induction) 2200w (3hp), 240v
Flowrate (cubic metres per hour) 3000m3/hour
Inlet diameter 1 x 150mm or 3 x 100mm
Collection bag capacity 296 Litres
Maximum continuous run time 2 hours
Dimensions (WxDxH) 1560mm x 550mm x 1920mm
Weight 75kg
Product Guarantee 5 Years