3Pcs Ceiling Fan Pull Switch, Anti-Corrosion Replacement, Pull Chain Light Control 250V 3A 125V 6A

General DescriptionThe pull chain switch is a convenient and simple to use solution for controlling your electrical appliances such as ceiling lights, ceiling fans and wall lights. Simply pull gently on the beaded chain to activate or deactivate the device, making its use accessible even to electrical novices.Technical specificationsItem type: chain switchMaterial: plastic, pure copperDiameter: approx. 30mmTotal thickness: approx. 18mm Length of exposed pull chain: approx. 10cm Gross weight: approx.48gVoltage and current: 250V 3A or 125V 6A (AC)Lifespan: more than 30,000 hoursCompatibility and accessoriesCompatible with ceiling lights, ceiling fans, table fans, wall lights and other electrical appliances.Can set control of 3 groups of closed lights.InstallationThe installation of the switch is simple and straightforward thanks to a back cover marked with the connections Required: 1 and 2 connect to the capacitor wire, 3 connect to the fan ignition wire, and L connect to the positive and negative ignition wire. This allows installation even for those unfamiliar with electrical wiring.UsageTo operate the switch, pull the beaded chain to control the light or fan.You can also adjust the fan speeds (high, medium, low) by connecting the appropriate capacitor. Other information The switch comes with a board interface, making it easy to lock the wire. Note that all data is measured manually, which may result in measurement errors.