4-20mA 8 Indication Directions Polycarbonate Wind Speed Sensor Anemometer Measuring Tool

1、Polycarbonate shell, high mechanical strength, high hardness, corrosion resistance, no rust can be used outdoors for a long time.

2、8 indication directions, high-performance bearings, small rotational resistance, accurate measurement, more convenient and practical.

3、Small and light in size, easy to carry and assemble, anti-electromagnetic interference treatment, can be applied to both four-wire and three-wire connection.

4、Anti-exposure, high impact strength, and with the internal smooth bearing system to guarantee the accuracy of information collection.

5、Widely used in the measurement of wind direction in greenhouses, environmental protection, weather stations, ships, terminals, breeding and other environments.

Condition: 100% Brand New

Item Type: Wind Speed Sensor

Material: Polycarbonate

Parameter:

v\:* {behavior:url(#default#VML);}

o\:* {behavior:url(#default#VML);}

x\:* {behavior:url(#default#VML);}

.shape {behavior:url(#default#VML);}

DC Power Supply (Default)

10-30V DC

Maximum Power Consumption

Current Output

1.2W

Transmitter Circuit Operating Temperature

-20℃ to +60℃, 0%RH-80%RH

Measuring Range

8 Directions

Dynamic Response Time

≤0.5s

Output Signal

Current Output

4-20mA

Load Capacity

Current Output

≤600Ω

Calculation Method:

v\:* {behavior:url(#default#VML);}

o\:* {behavior:url(#default#VML);}

x\:* {behavior:url(#default#VML);}

.shape {behavior:url(#default#VML);}

0-10V Output Comparison Table

Output Value (V)

Corresponding Wind Direction

≈0

North Wind

≈1.4286

Northeast Wind

≈2.8571

East Wind

≈4.2857

Southeast Wind

≈5.7143

South Wind

≈7.1429

Southwest Wind

≈8.5714

West Wind

≈10

Northwest Wind

Power Wiring: Wide Voltage 10-30V DC Power Input

Product Size: Approx. 23.5 x 18.5 cm / 9.3 x 7.3 in

Weight: Approx. 317g / 11.2oz

Common Problems and Solutions:

No output or output error possible causes:

1) The range corresponding error causes the error PLC calculation. Please refer to the technical indicators for the range.

2) The wiring method is incorrect or the wiring sequence is wrong.

3) The power supply voltage is incorrect (24V power supply for 0-10V type).

4) The distance between the transmitter and the collector is too long, causing signal disturbance.

5) The PLC collection port is damaged.

6) Equipment damage.

.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}

1 x Wind Speed Sensor

1 x Cable

1 x Screw Kit (4 x Screw, 4 x Nut)