4-in-1 Cordless Gas Soldering Iron Kit, Soldering Torch, 12ml Tank

Features:1.4 FUNCTIONS: Gas soldering iron kit with soldering, cutting, flame spraying, and hot air blowing functions, stable performance, and a wide range of applications.
2.GOOD PERFORMANCE: The cordless soldering iron adopts a stainless steel hot air head with a large-diameter heat dissipation port, allowing for flame adjustment.
3.OPERATING TEMPERATURE: The flame temperature can reach 1300℃, the soldering iron temperature up to 450℃, and the operating time up to 50-80 minutes.
4. WITH 2 TIPS: Equipped with a soldering iron tip and a soldering tip, suitable for industrial soldering, electronic soldering, vehicle maintenance, etc.
5.ALUMINUM ALLOY: Made of aluminum alloy, lightweight and corrosion-resistant, with good thermal insulation and difficult to deform or wear.
Specifications:Item Type: Gas Soldering Iron Kit
Material: Aluminum Alloy
Filling Capacity: 12ml
Fuel Used: Pure Butane (Normal Lighter Gas)
Temperature: Flame Temperature up to 1300℃, Soldering Iron Temperature up to 450℃
Usage Time: 50-80 minutes
4 Functions: Soldering, Cutting, Fire Spraying, Hot Air Blowing
Gas Filling:
1. Use good quality gas to fill and confirm the switch is off, then inflate to 0FF.
2.Insert the gas canister into the air vent and press to inflate.
3.Gas filling can be completed in approximately 10 seconds.Wait a few minutes for the gas to stabilize before using.
4.If there is a whistling sound at the tail after gas injection, press the air port with the tip of the pen to eliminate it.
Ignition:
1. Replace the soldering iron tip
2. Push the switch to NO and hear a hissing sound
3. Use an igniter or lighter to light near the connector
4. Burn for 3 seconds after lighting the fire. When the fire is extinguished, the soldering iron tip will continue to heat.
5. Adjust the flame size, the + direction is large and the - direction is small
6. The flame temperature of this product reaches 1300℃ (the soldering iron tip temperature is 450℃). Pay attention to safety when using it. After use, turn the switch to OFF position.
7.When using a gas soldering iron, be sure to wait until the flame has completely burned away the object inside the soldering iron and is red-hot before using it.The flame size should not be too large to prolong the life of the soldering iron tip.
8.The flame length is approximately 1.2 to 2.2 cm.

Package List:Package includes: 1 x Gas Soldering Iron Pen
1 x Soldering Iron Tip
1 x Soldering Tip
Note:Take safety precautions when using it.