4-in-1 Wall Detector, Metal Wall Detector with LCD Screen, Stud Detector for Electrical Cable Detection, Wall Scanner for Wood, Metal, and AC Wires

Wide Application: This stud finder can be used to locate the center of wooden studs in wood paneling and drywall, as well as metal and AC wiring, allowing you to accurately install TVs, cabinets, drill holes in walls, etc.

4-in-1 Detection Mode: This stud finder has four different modes that can be switched: stud scanning, deep scan, metal scanning, and AC scanning.

Multifunctional: Stud scanning is used to find and locate the center and edge of wooden and metal studs up to 19 mm deep; the maximum positioning depth of the deep scan is 38 mm; the maximum metal detection depth reaches 60 mm;

AC Scanning can detect AC wires up to 51 mm deep. Screen Display and Alarm Prompt: During the detection process, the display screen will show the detection mode, signal strength, direction, etc. Additionally, the buzzer intensity will vary depending on the distance between you and the target; you can mark the position with a marker when the sound is loudest. It also has an AC warning function. Easy to Calibrate: You must calibrate the detector before each scan. First, select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the scale bar disappears and a beep sounds. In metal/AC mode, you must place it in the air for calibration.

Product Description

Wide Application

This finder can be used to locate the center of a wooden stud in wood paneling and drywall, as well as the position of metal and AC cables, so you can accurately install TVs, cabinets, drill holes in walls, etc.

How to Calibrate

You must calibrate the finder before each scan. First, select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the scale bar disappears and a beep sounds. If you accidentally shake the scanner, you must recalibrate the device. In metal/AC mode, you must place it in the air for calibration.

Specification

Color: Black and Silver

Package Included:

Wall Detector*1

Battery*1