4-in-1 Water Quality Tester – pH, TDS, EC, Temperature – Backlit LCD Display – 0.01 Accuracy for Swimming Pools and Aquaculture - 01

General Description

This water quality tester is ideal for analyzing various types of water, including tap water, filtered water, distilled water, bottled water, well water, and chilled water.

It is widely used in water purification, aquaculture, and hydroponics.

Technical Specifications

pH Measurement: 0.00 to 14.00 (accuracy ± 0.01) TDS: 0 to 9999 ppm (accuracy ± 2%) Conductivity: 0 to 9999 µS/cm

pH Resolution: 0.01 LCD screen with blue backlight

Compatibility and Accessories

Includes: 1 TDS-EC tester, 1 pH tester, 1 mineral detection pen, 3 calibration bags, and 1 leather packaging box. Instructions for Use

Installation

Remove the protective cap and immerse the pH meter electrode in the solution to be tested.

Press ON/OFF to turn on the device.

Usage

This tester is quick and easy to use: simply immerse it in the solution, stir, and get results in seconds.

No calibration or prior setup is required.