4 sticky hooks, towel rack, stainless steel hooks, simple hooks without drilling, 4 stainless steel hooks for kitchen and living room (round black angled hooks

Product Category: Adhesive Hook Material: Stainless Steel Style: Simple Hook Maximum Load: 3 kg [High-Quality Material]: The hook is made of food-grade 304 stainless steel, with a wire-drawing process, and the surface has an anti-corrosion coating, which can withstand daily scratches and ensure its durability. It is water and oil resistant, leaving no marks. [Modern Design Towel Hook]: A base and a cylinder form a clothes hook, allowing it to support a certain weight. The simple and elegant towel hook can be perfectly combined with many modern style decorations. [Easy to Install or Remove]: No drilling required, strong adhesion, and waterproof. Peel off the protective adhesive layer and stick the hook to a smooth surface; installation takes only seconds. Simply heat the adhesive with a hairdryer to remove it. 4-piece sticky hook set, wall-mounted towel hook, stainless steel bathroom hook, self-adhesive, waterproof and oil-resistant hook for kitchen, living room, and office. [Scope of Application]: This hook is suitable for smooth surfaces such as glass, mirrors, tiles, metal surfaces, etc. It is ideal for bedrooms, bathrooms, toilets, closets, kitchens, offices, etc. Instructions for Use It is recommended to regularly clean the product's surface with water or a mild detergent, then dry it with a soft towel. To maintain its shiny and clean appearance, do not use detergents containing salt or vinegar. Avoid scratching the product's surface with hard objects. Do not wipe with a rough cloth; it is recommended to use special cleaning cloths. Do not allow contact with organic solutions or corrosive chemicals, and avoid using it in environments containing the above-mentioned substances, as this may damage the surface coating and affect its brightness. This product is suitable for installation after the completion of the decorating project to prevent damage and corrosion. Any damage to quality caused by using this product in a manner inconsistent with the above instructions will be the responsibility of the user. Installation Steps: Clean and dry the wall, taking care to remove all dust, grease, and wax from the surface. Before installation, mark the desired location of the product on the wall. Apply adhesive to the metal area on the back of the product. Remove the protective film from the double-sided adhesive tape. Press the back of the product against the marked position for 3 to 5 seconds. Use a self-adhesive, nail-free adhesive strip to secure the product. For best results, please wait 3 to 5 days before use. Note: Do not apply this product to whitewashed walls, wallpapered walls, lime-coated walls, or other soft or uneven surfaces.Shop Tips: 1. The size is measured manually, please allow for a 1-3 cm error. 2. Due to different monitor pixel settings, there may be a slight color difference; please refer to the actual product.