433.92 MHz Gate Remote Control for Sommer 4025 BLUE, 4031, F51-051, 4 Channels, Gate Remote Control

Compatible: Remote control for Sommer 4025 BLUE, 4031, F51-051. Frequency: 868 MHz, transmission range: 50-100 meters, pairing required before use. 4 buttons to control up to 4 garage door openers. Code: Replaces rolling code, offering increased security. Batteries included, ready to use, a superior replacement. Pairing required before use. Sliding window: Prevents accidental contact and protects the buttons from impact damage. The remote control is made of high-quality, durable plastic, finely sanded and polished; the buttons are easy to press and pleasant to the touch. Product included: The garage door remote control is shipped after being carefully checked manually. If you encounter any problems (pairing/frequency/model) after purchasing the remote control, please feel free to contact us. Compatible: remote control for Sommer 4025 BLUE, 4031, F51-051. Frequency: 868 MHz, transmission range: 50-100 meters, pairing required before use. 4 buttons to control up to 4 garage door openers. Code: replaces rolling code, offering greater security. Batteries included, ready to use, a superior replacement. Pairing required before use. Sliding window: prevents accidental contact and protects the buttons from impact damage. The remote control is made of high-quality, durable plastic, finely sanded and polished; the buttons are easy to press and pleasant to the touch. Product included: the garage door remote control is shipped after being carefully checked manually. If you encounter any problems (pairing/frequency/model) after purchasing the remote control, please feel free to contact us. Programming procedure as follows: 1. Press the learn button on the radio or control panel once for channel 1; LED 1 will light up. Press it twice for channel 2; LED 2 will light up. 2. Initiate transmission by pressing one of the required CH buttons on the transmitter (within range of the radio receiver). The LED will flash and then turn off depending on the selected channel. 3. Repeat steps 1 and 2 to program additional handheld remote controls to the designated radio receiver. Up to 112 memory locations are available. 4. Press the button on the transmitter to perform a function test. Note: To delete a single transmitter code or all transmitter codes from the receiver's memory, please refer to your receiver's manual. Deleting All Codes: It may sometimes be necessary to delete all codes stored in the receiver, for example, if a remote control is lost. Proceed as follows: 1. Press and hold the Learn Button A on the radio receiver. 2. The LED will begin to flash after 5 seconds. After another 10 seconds, the LED will remain continuously lit. 3. After a total of 25 seconds, all LEDs will remain continuously lit. 4. Release the Learn Button A: the deletion process is complete. All stored codes, including lighting codes, should now be deleted. Verify this operation by pressing the transmitter previously used to operate the device. No beep should sound.