433.92 MHz remote control, compatible with V2 Phoenix 2/4/TXC/TRC/TSC4/Hand – 2-pack, 4 channels, unbranded

COMPATIBILITY – This garage door remote is compatible with V2 PHOENIX 2, V2 PHOENIX 4, V2 PHOX 2, V2 PHOX 4, V2 TXC, V2 TRC, V2TSC4, and V2 HAND.
2 CHANNELS – The remote has 2 channels for opening gates and garage doors with a single command, allowing for efficient control of your door automation.
USER MANUAL – The remote comes with a user manual that enables quick and easy programming and troubleshooting.
FREQUENCY – Please ensure your original remote operates at a frequency of 433.92 MHz.
QUALITY CUSTOMER SERVICE – Please contact us if you experience any problems after purchasing the remote.
Note: Your remote control must match the photo, and your remote control model must be listed above.

Description:

• Programming Type: Programming with Receiver
• Buttons: 2 Buttons
• Frequency: 433.92 MHz
• Battery: Built-in Battery
• Range: 10–50 m (outdoors)
• Material: Metal and ABS
• Code: Rolling Code

• Access to the receiver is required. Please ensure you have access to the receiver/opener before purchasing.

  If your original remote control is not listed, please do not purchase it.

  Programming:

  1. Clear Code

  Press buttons A and B simultaneously. The LED indicator will flash three times and then turn off.

  Then, keep button A pressed and release button B. Then press button B three times. The LED indicator on the duplicator will flash rapidly, indicating that the existing code has been successfully deleted. You can now proceed to the next step of copying.

  2. Copying the Original Remote

  Hold the original remote and the duplicator as close to you as possible. Then, simultaneously press a button on the original remote and a button on the duplicator. The LED will flash twice and then rapidly; this indicates that you have successfully copied the original remote.

  3. Resetting

  What happens if you accidentally delete the copied code? No problem, simply press the last two buttons, C and D, simultaneously. The LED will flash three times and then rapidly, and the restored code can still be used.