433.92 MHz remote control – Compatible with V2, PHOX 2/4, Handy 2/4, Phoenix 2/4, TXC4/TRC4/TSC4 – 2 pieces

COMPATIBILITY – This garage door remote is compatible with V2 PHOENIX 2, V2 PHOENIX 4, V2 PHOX 2, V2 PHOX 4, V2 TXC, V2 TRC, V2TSC4, V2 HAND
2 CHANNELS – The remote has 2 channels for opening gates and garage doors with a single command, allowing for efficient control of your door automation.
USER MANUAL – The remote comes with a user manual that enables quick and easy programming and troubleshooting.
FREQUENCY – Please ensure your original remote operates at a frequency of 433.92 MHz.
QUALITY CUSTOMER SERVICE – Please contact us if you experience any problems after purchasing the remote.
Note: Your The remote control must match the photo, and your remote's model must be listed above. COMPATIBILITY – This garage door remote is compatible with V2 PHOENIX 2, V2 PHOENIX 4, V2 PHOX 2, V2 PHOX 4, V2 TXC, V2 TRC, V2TSC4, and V2 HAND2. CHANNELS – The remote has 2 channels for opening gates and garage doors with a single command, allowing for efficient control of your gate automation. INSTRUCTIONS – The remote comes with an instruction manual for quick and easy programming and troubleshooting. FREQUENCY – Please ensure your original remote operates at a frequency of 433.92 MHz. CUSTOMER SERVICE – If you experience any problems after purchasing the remote, please contact us.

Description:

• Programming Type: Receiver Programming
• Buttons: 2

Buttons

• Frequency: 433.92 MHz
• Battery: Built-in Battery
• Range: 10–50 m (outdoors)
• Material: Metal and ABS
• Code: Rolling Code

• Access to the receiver is required. Please ensure you have access to the receiver/opener before purchasing.

  If your original remote is not listed, please do not purchase.

  Programming:

  1. Clear Code

  Press buttons A and B simultaneously. The LED indicator will flash three times and then turn off. Next, keep button A pressed and release button B. Then press button B three more times. The copier's LED indicator flashes rapidly, indicating that the existing code has been successfully deleted. You can now proceed to the next copying step.

  2. Copying the Original Remote

  Hold the original remote and the copier as close as possible. Then, simultaneously press a button on the original remote and a button on the copier. The LED indicator will flash twice and then rapidly; this indicates that you have successfully copied the original remote.

  3. Restoring

  What happens if you accidentally delete the copied code? No problem, simply press the last two buttons, C and D, simultaneously. The LED will flash three times and then rapidly; the restored code can still be used.